Osculati3469 produkter
Kolleksjon →
Siderull for båthenger — svingbar sidestøtte, 14 utførelser
€78,38
sis. ALV 25,5 %
Den svingbare siderollen er en viktig komponent designet for å gi jevn og effektiv håndtering om bord på fartøyet. Egnet for en rekke marine bruksområder, og leverer pålitelig ytelse for å støtte dine behov på sjøen.
Velg modell14 alternativer
Rett • 40 mm rør • 4 × Ø100 mm ruller
€78,38
Rett • 30 mm rør • 2 × Ø100 mm ruller
€41,80
Rett • 40 mm rør • 2 × Ø100 mm ruller
€42,53
Hevet • 40 mm rør • 2 × Ø100 mm ruller
€60,15
Hevet • 40 mm rør • 4 × Ø100 mm ruller
€69,68
Dobbelbrakett (fast) • 40 mm rør • 2 × Ø120 mm ruller
€38,90
Dobbelbrakett (svingende) • 40 mm rør • 2 × Ø120 mm ruller
€40,90
Hevet • 40 mm rør • 6 × Ø100 mm ruller
€97,06
Hevet • 40 mm rør • 8 × Ø100 mm ruller
€104,62
Rett • 30 mm rør • 2 × Ø120 mm ruller
€41,74
Rett • 40 mm rør • 2 × Ø120 mm ruller
€42,62
Hevet • 40 mm rør • 2 × Ø120 mm ruller
€60,15
Rett • 40 mm rør • 4 × Ø120 mm ruller
€78,38
Hevet • 40 mm rør • 4 × Ø120 mm ruller
€74,93
Deler som passer
Passer varianten du har valgt — legg i kurven med ett trykk.
På lager
91 % av bestillingene sendes innen 3 virkedager
Fri frakt over 100 € · Gratis retur innen 14 dager
Bruksområder
Trailer roller replacement
Trailer rollers wear and crack over 5-7 seasons of immersion. Direct replacement for most Osculati and generic side rollers — match by tube size + roller count.
Trailer upgrade
Going from 2-roller to 4-roller per side dramatically improves hull support and launch ease, especially for larger boats. Worth the upgrade on any cruiser trailer.
New trailer build
Building a custom trailer or restoring an old one? Pick configurations to match your boat's hull profile. Heavier boats = more rollers + larger Ø.
Spesifikasjoner
ConfigurationStraight • 40 mm tube • 4 × Ø100 mm rollers
Tube size40 mm
Roller ØØ100 mm
BrandOsculati
TypeSide roller for boat trailers
MaterialSteel bracket + black rubber rollers
VersionsStraight, Raised, Double-bracket (fixed or swinging)
Tube sizes30 mm or 40 mm
Roller diameter100 mm or 120 mm
Roller count2, 4, 6 or 8 rollers per bracket
Made inItaly
OpprinnelseslandItalia
Monteringsanvisning
1
Measure the trailer tube
Most boat trailers use 30 mm or 40 mm square tube for side supports. Measure yours before ordering — wrong size won't clamp.
2
Pick the version
Straight: standard bracket, basic protection. Raised: extra height for hulls with high freeboard at the trailer support point. Double-bracket: heavy hulls (>9 m), distributes load across two roller assemblies.
3
Pick roller count and Ø
More rollers + larger Ø = gentler hull support, but more cost. 2 × Ø100 for small runabouts; 4-6 × Ø100 for cruisers; 8 × Ø100 or 4 × Ø120 for heavier boats.
4
Mount to trailer
Bracket clamps to the trailer's side tube with U-bolts (sold by the trailer maker). Tighten cross-pattern. Adjust roller height to support the hull at chine.
5
Test and adjust
Launch and recover at the local ramp. If hull rocks or scrapes, raise or lower the rollers. Adjust angle so rollers contact the hull squarely.
Dokumenter
Kompatible produkter
Anmeldelser
Kundeanmeldelser vises her når du aktiverer en app for produktanmeldelser.
