My boat
Studer Innotec54 products Collection →

Studer ECF-01 cooling fan for Xtender XTS

€129,00
incl. VAT 25.5%

XTS cooling fan108353Boosts powerEngine room use
  • The Studer ECF-01 is an external cooling fan designed specifically for the Xtender XTS inverter/charger.
  • It raises the continuous power rating of the XTS unit, as shown by the XTS 900-12 going from 500 VA to 650 VA.
  • It also improves the 30-minute power capability of the connected XTS model.
  • Studer recommends the ECF-01 for installations in warm engine rooms where heat can otherwise limit inverter output.
  • It is compatible with the XTS 1200-24, XTS 1400-48 and XTS 900-12 inverter/chargers.

The Studer ECF-01 is an external cooling fan module for the Studer Xtender XTS inverter/charger range, raising both continuous and 30-minute power output. It is recommended for warm engine room installations where heat would otherwise limit the XTS unit's performance.



In stock
Free shipping on orders over €100 · Free returns within 14 days

Use cases

Warm engine room
Adds cooling to the XTS when it is installed near engine heat sources.
More continuous power
Increases the continuous power rating of the connected XTS inverter/charger.
Higher 30-min rating
Improves the 30-minute power output of the XTS during peak loads.

Specifications

Studer reference108353
OriginMade in Switzerland
Country of originSwitzerland

Installation guide

1
Plan the mounting location
Have a qualified marine electrician position the ECF-01 close to the Xtender XTS, in a location that allows effective airflow around the unit.
2
Connect to the XTS unit
Fit the cooling fan module to the Xtender XTS according to Studer's installation documentation for the ECF-01.
3
Check fusing and cabling
Use correct fusing and cable sizing as specified in the Studer manual for the ECF-01 and the connected XTS model.
4
Verify operation
After installation, confirm the fan operates correctly and that the XTS reaches its expected continuous and 30-minute power levels.
Compare →