My boat
Studer Innotec54 products Collection →

Studer nx temperature sensor for next

€66,95
incl. VAT 25.5%

For next1Temp compensationRJ45 connection48 V system
  • The nx tempSensor measures battery bank temperature directly at the battery.
  • It transmits temperature data to the next1 inverter/charger for charge compensation.
  • It is designed specifically for Studer next1 systems and is not compatible with Xtender units.
  • The sensor connects via an RJ45 cat5e communication cable, sold separately in 1 m and 3 m lengths.
  • Using a temperature sensor helps protect the battery bank from incorrect charging in cold boat interiors or hot engine rooms.

The Studer nx tempSensor is a battery temperature sensor designed for the next1 nx1 6500-48 inverter/charger, connecting via an RJ45 cat5e cable. Mounted on the battery bank, it feeds temperature data to the next1 so the charging algorithm can compensate for cold or warm conditions, protecting the batteries from over- or under-charging.



In stock
Free shipping on orders over €100 · Free returns within 14 days

Use cases

Cold weather charging
Helps the next1 adjust charge voltage when the battery bank is cold during winter lay-up.
Battery protection
Reduces risk of over- or under-charging by accounting for actual battery temperature rather than assumptions.
Shore power use
Improves charge accuracy when the boat is connected to shore power for extended periods.

Specifications

Studer reference119020
OriginMade in Switzerland
Country of originSwitzerland

Installation guide

1
Mount the sensor
Attach the nx tempSensor to the battery bank in a location that reflects the actual battery temperature, following the manual.
2
Connect to the next1
Run an RJ45 cat5e communication cable from the sensor to the next1 inverter/charger.
3
Verify detection
Have a qualified installer confirm the next1 recognizes the temperature sensor and applies temperature compensation.
Compare →