AUTOTERM control panel & extension cable for air heaters
€30,90
incl. VAT 25.5%
Control panel for AUTOTERM air heaters — fit the panel where you actually want to control the heater (cabin, dashboard, helm). Two versions, plus a 5 m extension cable.
- Digital (€114.50) — LCD with 11 languages incl. FI/SE/NO, programmable timers
- Analogic (€37.90) — simple knob: turn on, set temperature, no menus
- 5 m extension cable (€30.90) — stack up to 2 (15 m total panel-to-heater)
- 4-pin connector, no separate battery, fits all AUTOTERM Air series
Use cases: replacement for failed panel, upgrade analogic → digital, or add a second panel for flybridge/aft helm. Languages and connector details in the tech specs.
Select model
Control panel — Analogic
€37,90
Extension cable — 5 m
€30,90
Control panel — Digital (multi-language)
€114,50
In stock — ships within 1–2 business days
Free shipping on orders over 100€ · Free returns within 14 days
Use cases
Live-aboard / long cruise
Digital panel + 5 m extension to put the control by the bunk — program the heater to come on 30 min before you wake up. Multi-language display = no Finnish-only restriction.
Backup heating, second helm
Add a second control panel at the flybridge or aft helm — same heater, two control points. Analogic version (€37.90) is the lowest-cost way to add a redundant panel.
Replacement for failed panel
Original panel water-damaged or display dead? Drop-in replacement — same 4-pin connector, same mounting holes. Upgrade to Digital while you're at it, or stay simple with Analogic.
Specifications
| Item | 5 m extension cable |
| Cable length | 5 m |
| Maximum stack | Up to 2 extensions (= +10 m) |
| Use | Extends panel-to-heater cable run |
| RRP | €30.90 |
| Brand | Autoterm |
| Compatible heaters | All AUTOTERM Air series (2D, 4D, 8D, ...) |
| Panel options | Digital (multi-language) or Analogic (knob-controlled) |
| Digital languages | EN, NL, DE, PL, ES, IT, FR, CZ, SE, NO, FI |
| Cable (heater included) | 5 m standard |
| Maximum total cable run | 15 m (5 m included + up to 2× 5 m extensions) |
| Connector | Original AUTOTERM 4-pin |
| Power source | From heater (no separate battery) |
| Made in | Latvia |
Installation guide
1
Choose mounting location for the panel
Pick a spot reachable from the helm or sleeping area, away from spray. Digital needs ~75×45 mm cutout; Analogic needs a smaller round hole. Both should be 1.0–1.5 m from the deck to read comfortably.
2
Run the cable to the heater
Route the cable away from heat sources, sharp edges, and bilge water. The heater ships with 5 m — if you need more, plug in an extension cable here. Maximum stack is 2 extensions (15 m total).
3
Plug in the 4-pin connector
Connect the panel cable to the heater's control port. Hand-tight is enough — no tools needed. Connector is keyed so it only fits one way.
4
Test before final installation
Power up the heater and verify the panel responds. Digital should show the menu, Analogic should turn the heater on/off with the knob. Test before drilling final mounting holes.
5
Mount and seal
Bed the panel cutout with marine sealant to prevent water ingress through the dashboard. Secure with the included screws. Coil any excess cable and zip-tie it away from moving parts.
Documents
Compatible products
★★★★★ Reviews
Customer reviews will appear here once you enable a product reviews app.