Illuminated marine toggle switches with engraved symbols — replacement switches for control panels, each with a specific engraved symbol (navigation lights, anchor, horn, pumps, blower, refrigerator, etc.). Three surface finishes (A/B/C/V), 90+ symbol options.
~110 symbol options — covers every common marine circuit
3 finishes — A (anti-slip polycarbonate), B (different texture), C, V (premium)
15 A rocker switches with internal LED illumination
~€3 per switch — affordable spares or custom panel build
Use cases: Replace a damaged switch on an existing panel, build a custom switch panel from scratch, stock spares for the boat's electrical kit. Pick by symbol from the variant list to match your circuit need.
Select model108 options
Toggle w/lighted symbols Navigation lights A
€3,63
Toggle w/lighted symbols Anchor light A
€3,18
Toggle w/lighted symbols Horn A
€3,95
Toggle w/lighted symbols Flap A
€3,18
Toggle w/lighted symbols Blower A
€3,18
Toggle w/lighted symbols Windshield wiper A
€3,18
Toggle w/lighted symbols Bilge pump A
€3,18
Toggle w/lighted symbols Pressure tank A
€3,95
Toggle w/lighted symbols Empty A
€3,24
Toggle w/lighted symbols Bilge pump 2 A
€3,95
Toggle w/lighted symbols Control panel light A
€3,18
Toggle w/lighted symbols Stereo A
€3,95
Toggle w/lighted symbols Cockpit lights A
€3,18
Toggle w/lighted symbols Anchor winch A
€3,18
Toggle w/lighted symbols Door A
€3,95
Toggle w/lighted symbols Shunt A
€3,18
Toggle w/lighted symbols Refrigerator A
€3,95
Toggle w/lighted symbols Spot light A
€3,18
Toggle w/lighted symbols Ecosounder A
€3,95
Toggle w/lighted symbols Autopilot A
€3,18
Toggle w/lighted symbols Up/down gangway A
€3,18
Toggle w/lighted symbols Gangway extension A
€3,18
Toggle w/lighted symbols Fuel pump A
€3,18
Toggle w/lighted symbols 24
12V label A
€3,95
Toggle w/lighted symbols Cabin light toggle A
€5,95
Toggle w/lighted symbols Windshield spray toggle A
Browse the variant list for your circuit type — nav lights, anchor, horn, bilge pump, etc. Most common marine circuits are covered.
2
Pick the finish
A: anti-slip polycarbonate (most common). B: alternative texture. C: simpler. V: premium. Most boats use A finish for compatibility with existing switches.
3
Replace damaged switch
Disconnect circuit at the breaker. Pull old switch from panel. Wire new switch with same polarity (illuminated side to live).
4
Test on power
Reconnect at breaker. Switch should illuminate when ON. Verify the circuit operates as labeled.